Providing the same weather protection as slip sills, stooled sills extend sideways into the masonry to either provide an additional feature, or to provide a base for jambs and mullions to bear off when used in full surround conditions.
Sills can be produced in exact lengths required for individual needs, and can take into account the required daylight opening size(s).
Our standard profile Stooled Sills are based on the same sections as the Slip Sill range, but incorporate stools for building into various walling conditions, including the use of cast stone jambs, mullions and rybats.
Stooled Sills can be produced in one-piece lengths of up to 1800mm, however for safer handling and more efficient transport, we may advise on casting in shorter length parts.
215mm x 140mm high overall and 65mm high on the front face. Suited for rendered wall applications.
Self weight = 45kg/M.
215mm x 140mm high overall and 105mm high on the front face. Suited for rendered wall applications.
Self weight = 52kg/M.
195mm x 140mm high overall and 65mm high on the front face. Suited for facing brick or exposed masonry applications.
Self weight = 42kg/M.
195mm x 140mm high overall and 105mm high on the front face. Suited for facing brick or exposed masonry applications.
Self weight = 48kg/M.
Sill lengths are determined by the daylight opening size (ingoe to ingoe), plus the widths of the stools (usually 100mm, or 150mm each when used with a jamb or rybat).
Sill lengths are determined by the daylight opening sizes (ingoe to ingoe), plus the widths of the end stools (usually 100mm, or 150mm each when used with a jamb or rybat), plus the width(s) of the central mullion stools (usually 150mm).
