Decorative Lintels

Cast stone decorative lintels provide an attractive feature above window and door openings and are available in a variety of colours and profiles.

They can be used solely on their own, or used to create full surrounds alongside jambs and mullions where appropriate.

Our cast stone lintels are produced in two basic thicknesses and heights to suit different walling applications.

These should be used in conjunction with either a structural metal lintel below (e.g. Catnic or IG) or a pre-stressed concrete lintel above if the finish permits.

100mm thick lintels are for use in facing brick or exposed masonry applications, 120mm thick lintels are for use in roughcast applications or where the lintel is intended to project from the finished facing brick or exposed masonry.

Cast Stone - Plean Precast

Plain Rectangular Lintels

Finished on plain front face and soffit, these lintels are available in 4 cross-section sizes. These can be produced to the exact overall lengths required for individual needs, however our Technical Teams will advise of the number of parts these should be supplied in, for the ease of transport and handling.

Ref: Thickness (mm) Height (mm) MaxLength (mm)
SPL1 100 215 1800
SPL2 120 215 1800
SPL3 100 140 1200
SPL4 120 140 1200

Cast Stone

Cast Stone

 

Keystone Lintels

Finished on front face and soffit with the added feature of a projecting integral keystone, these lintels are available in 4 cross-section sizes with the keystone projecting as shown. These can be produced to the exact overall lengths required for individual needs, however our Technical Teams will advise of the number of parts these should be supplied in, for the ease of transport and handling.

(All keystone lintels can be produced with a recessed feature)

Ref: Thickness (mm) Height (mm) MaxLength (mm)
SPL1K 100 215 1800
SPL2K 120 215 1800
SPL3K 100 140 1200
SPL4K 120 140 1200

Cast Stone

Cast Stone

 

Splayed End Lintels

Finished on plain front face and soffit, these lintels have splayed feature ends and are available in 4 cross-section sizes. It is advised that these are used in conjunction with a structural metal lintel below, rather than a concrete lintel above. These are produced to the exact overall lengths required for individual needs, however our Technical Teams will advise of the number of parts these should be supplied in, for the ease of transport and handling.

Ref: Thickness (mm) Height (mm) MaxLength (mm)
SDL1 100 215 1800
SDL2 120 215 1800
SDL3 100 140 1200
SDL4 120 140 1200

Cast Stone

Cast Stone

 

Splayed End Keystone Lintels

Finished on front face and soffit, these lintels have splayed ends with the added feature of a projecting integral keystone, these lintels are available in 4 cross-section sizes with the keystone projecting as shown. These must be used in conjunction with a structural metal lintel below. These are produced to the exact overall lengths required for individual needs, however our Technical Teams will advise of the number of parts these should be supplied in, for the ease of transport and handling.

(All keystone lintels can be produced with a recessed feature)

Ref: Thickness (mm) Height (mm) MaxLength (mm)
SDL1K 100 215 1800
SDL2K 120 215 1800
SDL3K 100 140 1200
SDL4K 120 140 1200

Cast Stone

Cast Stone

 

Lintels with Mitred Chamfer

Finished on front face and soffit, these lintels have a 20x20mm chamfer with a downward mitre chamfer at the bottom edge local to the daylight opening, available in 4 cross-section sizes. Normally used in conjunction with chamfered jambs. These are produced to the exact overall length required to suit the daylight opening plus required bearing extents / jamb widths. Our Technical Teams will advise of the number of parts these should be supplied in, for the ease of transport and handling.

Ref: Thickness (mm) Height (mm) MaxLength (mm)
SCL1 100 215 1800
SCL2 120 215 1800
SCL3 100 140 1200
SCL4 120 140 1200

Cast Stone

Cast Stone

Cast Stone

 

Lintels with Mitred Chamfers for Mullion Reprise

Finished on front face and soffit, these lintels have a 20x20mm chamfer with a downward mitre chamfer at the bottom edge local to the multiple daylight openings, available in 4 cross-section sizes. Normally used in conjunction with chamfered jambs and mullions. These are produced to the exact overall length required to suit the daylight openings plus jamb and mullion widths. Our Technical Teams will advise of the number of parts these should be supplied in, of which are normally split centred over the mullion(s).

Ref: Thickness (mm) Height (mm) MaxLength (mm)
SCL5 100 215 1800
SCL6 120 215 1800
SCL7 100 140 1200
SCL8 120 140 1200

Cast Stone

Cast Stone

Cast Stone

 

Lintels with Stopped Chamfer

Finished on front face and soffit, these lintels have a 20x20mm chamfer at the bottom edge local to the daylight opening which taper out, available in 4 cross-section sizes. Can be used in conjunction with chamfered jambs, or built in to the surrounding masonry. These are produced to the exact overall length required and details to be discussed to ascertain extents of chamfer. Our Technical Teams will advise of the number of parts these should be supplied in, for the ease of transport and handling.

Ref: Thickness (mm) Height (mm) MaxLength (mm)
SCL9 100 215 1800
SCL10 120 215 1800
SCL11 100 140 1200
SCL12 120 140 1200

Cast Stone

Cast Stone

Cast Stone

 

Lintels with Stopped Chamfer for Mullion Reprise

Finished on front face and soffit, these lintels have a 20x20mm chamfer at the bottom edge local to the multiple daylight openings which taper out at the jambs and mullions, available in 4 cross-section sizes. Normally used in conjunction with chamfered jambs and mullions, but can be built in to the surrounding masonry thus doing away with jambs. These are produced to the exact overall length required and details to be discussed to ascertain extents of chamfer. Our Technical Teams will advise of the number of parts these should be supplied in, for the ease of transport and handling.

Ref: Thickness (mm) Height (mm) MaxLength (mm)
SCL13 100 215 1800
SCL14 120 215 1800
SCL15 100 140 1200
SCL16 120 140 1200

Cast Stone

Cast Stone

Cast Stone

Contact us

 

Get in touch by phone 01786 812 221, email or complete the contact form below.